History

In that old garage area fifths north of the town of Armstrong where, by then, were still not open all the streets today, old machines are repaired and begin to make some mills winds and winches for emparvar grass.

Year 1956

They are taking the first steps of a great story. The first implements that are starting to manufacture plows bars. They were made with recovered materials imported plows, purchased at salvage yards, as rudders and springs not manufactured in Argentina.


Year 1960

At the beginning of the 60s, shaped like a factory, that first shed Cordova Street No. 764. Then you add in the manufacture multiple disk is constructed, Dredge double action and the combined coarse grain seeder. These mechanical traction implements were new at that time, because generally only used with animal traction.


Year 1965

The first drill fine-grained, inspired by a model of an American brand is manufactured.


Year 1966

Begin to manufacture implements major changes for the time, mechanical hydraulic lift, bushings bearings to bolilleros, laminated material folded or rolled irons to gummed.
Alongside these model changes necessary changes are made in the manufacturing process and begins a time of travel, attendance at exhibitions and search for new suppliers of industrial machinery, incorporating these lathes moments hydro-copyists, welding wire and cutting saw .



Year 1968

In July, the one-man workshops Metalúrgicos Crucianelli becomes a corporation.


Year 1970

Inside the factory lived a great growth. They are created, by necessity, different sectors located each in a shed. On one hand, the factory. On the other hand, the sector of paint, materials warehouse, the cargo sector, that of finished machines and casting. By then, the company occupied between 1,500 and 2,000 m2 covered and was framed within the urban fabric, annoying neighbors and interrupting the passing on the street.


Year 1975

A fine grain seeder was called C5, where the "C" alluded to the incorporation of the gearbox and the "5" reflected the year.


Year 1976

Such disorderly growth led to think about moving to a new place, with the idea of having all areas together in a modern industrial plant.


Year 1978

That great visionary, Don Nazareno decides the place and the grounds of the existing plant acquired in Route No. 9. Using common sense, without knowing what it meant to the layout, designs, projects and makes technical management of the existing plant . Always behind every detail.


Year 1981

It begins to move the foundry sector.


Year 1982

In the first days of January ends the final transfer, thus starting the manufacture of implements.
In this year launched the coarse H82 10 rows (where again "H", being fully hydraulic and '82' for the current year) and starting the race at large machines.



Year 1984

Don Nazareno Crucianelli dies. The goal of the company is geared increasingly to concentrate efforts on fewer models and increasing quality, rather than meet a range of market needs.


Year 1985

Pioneering the first born and begins to market in 1986. Its name is because it was the first machine that changed the concept of fine grain seeders, built on a strong chassis and large capacity hopper, designed for large producers with the need transport and suitable for fertilization. The machine was very different from their conventional competitors, and after rapid changes gives rise to the Dual Pioneer.


Year 1986

Having some years after that transfer to the new plant, incorporating modern industrial machinery and equipment is necessary, according to this new structure.


Year 1996

Crucianelli SA is the first company of agricultural machinery in South America to incorporate a welding robot.


Year 1997

The first numerical control lathe is purchased. So you still cutting machines and presses with PLC and bridge cranes, up to what was a milestone in the company.


Year 1999

The construction of the current casting plant is started, in order to move to a new area that apart factory ship sector.


Year 2000

At the beginning of the new millennium will continue to incorporate other numerical control lathes and two new welding robots.


Year 2001

Again Crucianelli SA inaugurated a first surface treatment system and equipment paints great bearings, marking a new milestone.


Year 2002

The fourth welding robot is incorporated.


Year 2004

Incorporating induction furnace is performed for the automated casting process.


Year 2005

Venezuela, Australia and countries in Eastern Europe: the area of foreign trade thinking neighboring countries markets is created.


Year 2006

Later this year the robot No. 5 is incorporated and production area 10,000 m2 7,500 to expand.


Year 2007

The plant with capacity to export is prepared, installing a second assembly line. This allows to produce all models throughout the year. The project started in 2000, installing an automatic painting line and surface treatment, achieving a better finish on the machines is completed.


Year 2008

Following this guideline, the plant is expanded to better meet demand and further strengthened increasingly in countries like Russia, Belarus, Kazakhstan, Ukraine, Uruguay, Venezuela, Paraguay, Bolivia, Chile, Brazil, Mexico, South Africa, New Zealand and Australia.


Year 2011

Crucianelli, true to its philosophy of continuous growth, begins execution of infrastructure works to increase the plant by 50%, from 10,000 m2 to 15,000 m2.
The areas involved in the expansion include:
administrative and production offices; reception and processing of raw materials; final assembly line of product; new seeders delivery area with subdivisions: one for the domestic market and another
for the foreign market; and area of parts and accessories.
This also allows you to expand the area of prototype, giving it more responsive to new development proposals.
As a result, it is possible to comply with delivery times of growing demand and have a more flexible structure.

Also, a modernization of the paint system occurs.

2016


We met 60 years! Making seeders with increasingly developing Striving for absolute efficiency . For our clients can Every year exceed the limits of Production.